Easy Green

What is Easy Green ?

Cabkan® Easy Green is a newly developed system for efficient grassing and fortifying of areas.  As this fortifying system warrants natural draining, it is the ideal alternative to sealing the soil with artificial draining systems.

The Grid Element
The Cabkan® Easy Green-Element is grid-shaped: the lower surface with broad webs provides higher load capacity. The upper surface with narrow webs provides more green and a natural view.

The special feature of Cabkan® Easy Green is the connection by groove and tongue. On the one hand, this connection is so flexible that it even resists a frost heave with consequent subsidence. On the other hand, it is so stable that it can be installed even without substructure.

If there is no substructure, it has the advantage that the lawn can root deeply so that the cover is fortified additionally.

With Cabkan® Easy Green you can create maintenance-free park areas, which are greened for the first time, even in hot summer periods, as there is no laborious preparation of the substructure.

Cabkan® Easy Green made of recycling plastics keeps the moisture which is vital for a beautiful lawn in the subterranean ground.

 

Characteristics and Advantages of Cabkan® Easy Green

  • Cabkan® Easy Green can be installed without the common massive substructure or entirely without substructure (according to area of use)
  • Maintenance-free greening
  • Optimal fortification and greening: proportion of lawn up to 90%
  • Already after few weeks after installing Easy Green you will get a beautiful and rich greening
  • Very simple and fast installation: 100 m2 with substructure in 3 hours by 2 persons
  • Reasonably priced installation as no massive substructure is necessary
  • Tongue and groove connection equalizes expansions due to temperature fluctuations
  • Moisture is stored in the subterranean ground by recycled plastics
  • lawn can root deeply
  • High stability
  • Installation on areas with gradients of up to 10% is possible
  • Resistant to weathering and UV stable
  • No sharp edges

 

Installation Instructions

Cabkan® Easy Green can be installed easily and fast.

Put the broad surface of Easy Green face down, so it lies optimally, the load capacity is increased and the greening improved.

With Cabkan® Easy Green loose or composite installation is possible. With composite installation Easy Green obtains a better support.

If Cabkan® Easy Green shall not be greened, Cabkan® Easy Green can be filled with gravel, stone chippings or sand.

 



Easy Green filled with synthetic resin

 

 

Installation on Parking Areas with Car Load

On existing Lawns or on Surface Soil:

The lawn can be driven on immediately after installing the Easy Green


Before: Area before installing Easy Green

After: Parking area greened by Easy Green after 3 weeks

 

Installation on Pebbly Ground:

  • Place kerbstones to fortify outer edges.
  • When installing on lawns: mow lawn short, equalize unevenness with sand or stone chippings 2/5 - 5/8 mm.
  • When installing on surface soil: flatten area, and equalizing layer of 1-2 cm of sand or stone chippings 2/5- 5/8 mm.
  • Place Cabkan® Easy Green in composite installation with grid side face up and the broad support surface face down.
  • In case no concrete kerbstone was placed, fortify each Easy Green in the outer row by an iron armouring of 20 mm diameter, 30-50 cm long.
  • Shake and fill evenly with loose surface soil. Water the area (wash-in). The surface soil shall lie 1-2 cm below the upper edge of the Easy Green so that the turf is not damaged by car tyres.
  • Sow the area and water again.

The lawn can be driven on immediately after installing the Cabkan® Easy Green.

Installation on Areas with Camper Van Load of up to 7 t

  • Place kerbstones to fortify outer edges.
  • Shake and roll surface soil and area.
  • If the ground is very soft, put on additional road construction fabrics or groundcover.
  • Put on compensating layer and sub-base of 2-5 cm of 8/16 mm stone chippings mixed with humus soil.
  • Place CABKAN® Easy Green in composite installation with grid side face up and the broad support surface face down. Thus higher load capacity is given. Walking barefooted after greening is warranted as well.
  • In case no concrete kerbstone was placed, fortify each slab in the outer row by an iron armouring of 20 mm diameter, 30-50 cm long, depending on the ground soil.
  • Shake and fill evenly with loose surface soil almost up to the upper edge of the grid and water the area (wash-in).
  • Sow the area and water again.
The lawn can be driven on immediately after installing the Cabkan® Easy Green.

Installation Drawing:

  1. Surface Soil
  2. Compensating layer
    sand or stone
    chippings
  3. Surface rolling
 

Profile of substructure and Easy Green

Installation for Fire Brigade Approaches

Substructure for Brigade approaches:

Please generally observe when installing:

 

Options of Using Cabkan® Easy Green

Technical Data

Ecology

Packaging